How To Make Glitter Wine Glasses

From Glossary
Jump to: navigation, search

Wine glasses never go the actual trend and they always look elegant and stylish. Pouring them over with glitter enhances their Aura. So let’s just add chunks of glitters to all of them worth sitting in front of.

DIY glitter wine glasses are simple make and add a unique, decorative look to parties, special events and holiday. You can coordinate glitter in colors game your special event, wedding, anniversary or birthday gathering. They also add sparkle to the holiday! Once you’ve learned the basic techniques, it's totally easily have to create more complex and detailed designs.

Glittery wine glasses are perfect for birthday presents, bachelorette parties, weddings, and other fancy occasions. You can use painter’s tape to create sharp lines and designs on your wine glasses and then make the glitter stick to your wine glasses using some glass paste. This project consider a several hours because for the drying times, but may be quite as well as fun to do.


Before getting started, we should have undeniable fact that what we really wish for to do and what material we will have. It’s awesome prone to find all the haul vital for the glittery beautiful wine glasses at home. But in the event you don’t have, don’t panic the material is easy to find on and budget friendly as well.

Purchase an arrangement of glass wine glasses. You can find inexpensive sets at Ross or TJ Maxx, a person can take up glasses in the thrift store.
Buy glitter in your favorite colors, Mod Podge, a paintbrush and lacquer sealing spray in the craft hold. Not every craft store will carry the lacquer clear coat, can be challenging is the ingredient that will ensure your glitter glasses are machine washable.

glass glue, such as Mod Podge or similar
wine glasses
paper plate
painter’s tape
large paint brush
isopropyl alcohol
cotton balls
Let’s correct Started!

Consider sketching the design first.Drawing your design on the piece of paper permit you to see what looks nice exactly what doesn't, and as a consequence prevent through making mistakes later always on. While it is feasible to clean off glitter and glue while they are still wet to replace the design, salvaging better to get the design right the first time. A couple of some popular design schemes for glitter wine glasses:
Apply glitter only towards the base of the wine glass, leaving over and above of the glass unused. The glitter can also extend ½ to 1 inches (1.27 to 1.54 centimeters) up the stem belonging to the glass.
Apply glitter only on the stems among the wine glass, leaving the remainder of the glass write off.
Create a preliminary or number using sparkle.
Create stripes on the entire glass (or just the stem) using glitter.
Apply glitter to all glass, except for the top ½ to inches (1.27 to the.54 centimeters of the rim.
Create designs using two different colors of glitter.
Create ombré designs by having two colors blend into one a new.
Set up your workstation.Find a flat table and cover it with some newspaper. Should be handling glue and glitter, which be quite messy. You will need to also place a small piece of cardboard or cardstock using your workspace to utilize for glitter collection. This will make it simpler to return the excess glitter into the glitter bottle for use in other designs.
Clean the outside of the wine glasses with alcohol.To make sure you keep the glitter will in order to the glass, you wish to clean the glass effectively. Use some cotton balls dipped in isopropyl alcohol to wipe the outer surface of your glass what your plan to try the glitter.
After possess to cleaned your glasses, set them aside for a few minutes and let the alcohol not damp.

Cut a skinny strip of tape and apply it to your wine glasses.Next, take your painter’s tape and cut it lengthwise made a long thin remove. If you will be applying the glitter just onto the stem, then you can use a short strip. Place the tape around the actual of your wine glass where you want your glitter to stop. Make certain the tape is even and securely attached to your wine glass. Otherwise, you could end up having a crooked glitter line around your wine glass.
To apply glitter to the base for the wine glass, tape off the stem of the glass leave the base exposed. Wish to also leave ½ one inches (1.27 to 2.54 centimeters) of the stem exposed as well; the glitter will then extend onto part of the stem.

To apply glitter to your stems of the wine glass, cover the base of the glass with tape. Then, cover backside portion in the bowl spend the tape as well.

To create an initial or number using glitter, you can implement an glue stencil or apply the glue in order to the glass free-hand.

To create stripes concerning the wine glass, simply wrap a long piece of tape around your glass in a spiral, making a candy-cane end result. There should be spaces concerned with the edges of your tape.

To use two or higher colors, tape off other places your don't want covered in glitter and apply the glue to the area of quite color. One you have applied the glitter and let the glue dry, you will apply the glue and glitter for your next color.

To create an ombré effect, simply tape heli-copter flight bottom and top a part of your design and work in the area between the pieces of tape.

Pour glass glue to your paper bowl.You will need for able to dip your paint brush in the glue, so pour a generous amount of glue onto a paper plate. Make sure that can be enough to coat each glass using a thick layer of glue to ensure that the glitter will hang on.
Paint the portion from the wine glass with glue.When your tape is secured, in order to paint brush and dip it into the glue. Then, begin painting the glue onto minimized half for the wine windshield. Make sure that you apply an even, thick layer of glue on the wine glass.
You may use a foam brush if you are worried about leaving streaks on the glass. A foam paintbrush may apply paint more evenly when compared with bristled paintbrush.

Pour glitter onto the glue.After anyone might have applied the glue to the wine glass, set aside the paint brush. Then, hold onto part of one's wine glass that doesn't have any glue on the griddle. Hold the glass over your little bit of cardboard and commence pouring glitter over the glue-coated areas of your wine glass.
Keep pouring glitter over the glass until all of the glue-coated areas are covered in an even layer of glitter.

When the finished, you can return unnecessary glitter into the bottle. Pick-up the cardboard and bend it slightly to develop a funnel soon after pour the glitter in the glitter vial.

If surplus to do multiple colors of glitter, then when possible need to let the first layer dry and then apply more glue for the glass. Then, pour not your your first glitter color as in class with extremely layer.

Bottom of Form


Finishing the Glasses

Leave the wine glasses to dry.The wine glasses will need to dry for about an hour, we may also leave them overnight to create sure that they are fully dry. The glasses will require to be completely dry before carbohydrates add the finishing touches.
Remember that if you will be going to applying more layers of glitter, you can do that once the first layer has dried.

2.Remove the tape. Once the glasses are dry, slowly peel away the painter’s tape. A person remove the tape, ought to be a pointy line dividing the glitter-covered glass along with the glitter-free glass. Discard the tape after you remove it.

Seal the glitter. Next, you will need to seal the glitter with more glue or with a sealing spray, such as Krylon Crystal clear. To seal the glass with more glue, make use of your large paintbrush to paint on another layer of glue the particular glitter. Then, let the glass dry for at least an per hour.

If you plan to use a sealing spray, then shortly need to take outside to seal your glass. You can put glass on a piece of newspaper in the grass outside after which you spray the Krylon Crystal clear onto the glittery areas of your glass. Then, allow the glass to dry for at least an an hour.

3.Tie a form of ribbon around the stem. To add a cute finishing touch to your glass, take a piece of ribbon and tie it around the top of the stem on top of your glass. Tie the ribbon in a bow and adjust essential. Now your glass is ready to use or to give being a gift!

Bottom of Form


Caring for your Wine Glasses

Use your glasses once they are completely dry.The glitter may smudge or come off easily if it's still just a little wet. Be certain the glitter is completely dry, you may want to leave your glasses out to dry right away. Put them somewhere that is dry and out with the reach of children and pets

Wash your wine glasses by pay.The glitter surface on your wine glass end up being fragile, so you will require extra precautions to be sure that the glitter does not chip off when you clean it. Wash your glitter wine glasses by hand and try to avoid the glitter areas a lot when you wash them. Focus on cleaning the inside of the goblet and the rim of the wine mirror.
Do not scrub your wine glasses. Instead, use comfortable sponge and try to avoid the glittered areas. Do not put the wine glasses in the dishwasher.

3. Dry your wine glasses right away.Do not let your glitter wine glasses sit in water. When you wash your wine glasses by hand, be sure to dry them off immediately afterwards with a soft large towel. Otherwise, the excess moisture may cause the glitter to chip and slough off.

Tadaaaa!!!! You Beautiful Glittery Wine Glasses are Ready :)

If you cherished this posting and you would like to receive extra info regarding wholesale craft glitter kindly go to our web site.